Gearheads - Find the Best Deal

Home

Search or browse by merchant, category or brand

Brand A-Z / Apex Tool Group (showing 1 to 10 of 13)

Order by: Relevance
Price: Low to High, High to Low

 
Image of Apex Tool Group 1911 Fitting & Deburring File Set
 

Apex Tool Group 1911 Fitting & Deburring File Set

Convenient set of five, round parallel files for deburring mag release hole, slide stop hole, and other frame pin holes to ensure precise fit and smooth function of your 1911. Also use to fit, shape, and blend beavertail grip safety to frame. American-pattern,...


 
Image of Apex Tool Group 6" Chain Nose Pliers
 

Apex Tool Group 6" Chain Nose Pliers

Just the right size to reach in and squeeze the Link connecting the Action Spring Follower and Action Bar Assembly together for removal. Mfg: Apex Tool Group


 
Image of Apex Tool Group American Pattern Hand Files
 

Apex Tool Group American Pattern Hand Files

One of the basic gun work files and an excellent, all purpose file for dressing, striking off, shaping and metal removing of all types. Parallel in width, taper slightly in thickness. Double-cut sides; one edge is single-cut, other is safe. Mfg: Apex...


 
Image of Apex Tool Group Lathe Files
 

Apex Tool Group Lathe Files

"The only way to file a barrel in a lathe" - P.O. Ackley. Heavy and stiff, with about twice as much slant on the teeth as a standard file. Produces a shearing cut on the lathe. Mfg: Apex Tool Group SPECS: 10" (25.4cm) 31/32" (24.6mm) wide. 1/4" (6.3mm)...


 
Image of Apex Tool Group Magazine Tube/Cap Pliers
 

Apex Tool Group Magazine Tube/Cap Pliers

Puts an end to gouged, scratched and ruined magazine tubes and caps. These slip-joint pliers adjust to fit them all and the curved, cushioned jaws grip tight without marring. Extra long for good turning leverage. Pads are replaceable. Mfg: Apex Tool Group...


 
Image of Apex Tool Group Mill Files
 

Apex Tool Group Mill Files

Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: Apex Tool Group SPECS: 6" (15.2cm), 19/32" (7.1mm) wide x 7/64"...


 
Image of Apex Tool Group Narrow Pillar Files
 

Apex Tool Group Narrow Pillar Files

Same shape as Pillar. Double-cut on sides; edges safe. Mfg: Apex Tool Group SPECS: 6" (15.2cm) #0 cut, .125 (1/8 inch thick) x .250 (1/4 inch wide).


 
Image of Apex Tool Group No-Clog Files
 

Apex Tool Group No-Clog Files

Covers every operation from rough shaping to final contouring of combs, grip areas. With heavy pressure, the wood rolls off at an incredible rate. For finish work, the weight of the file alone will make "sawdust" cuts. Fine sanding is usually all that's...


 
Image of Apex Tool Group Patternmakers' Cabinet Rasps
 

Apex Tool Group Patternmakers' Cabinet Rasps

The famous Nicholson Shoemakers' and Patternmakers' Cabinet Rasps made especially for wood filing where a smooth finish is desired. Comes in two cuts, second or smooth, 10" long cutting surface. Rasp is half-round shape, but slightly wider than usual...


 
Image of Apex Tool Group Round Files
 

Apex Tool Group Round Files

American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: Apex Tool Group SPECS: Steel, round files. 7" (15cm) long x 1/8" (3.2cm)...


Related Items on eBay

Sorry, no results from eBay were found!

Related Items on Amazon

 
Image of Weller ST7 ST Series Conical Solder Tip Hobbyist for WP25, WP30 and WP35 Irons, 0.31"
 

Weller ST7 ST Series Conical Solder Tip Hobbyist for WP25, WP30 and WP35 Irons, 0.31"

ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools. Precision ground copper tips are plated with iron, nickel and chromium. ST7 - .031" / 0.79 mm diameter Conical tip. Tinned with Lead Free alloy....


 
Image of Apex Tool Group 7135W Replacement Soldering Gun Tip
 

Apex Tool Group 7135W Replacement Soldering Gun Tip

Returns will not be honored on this closeout item.


 
Image of Crescent CRW12 1/2" Drive 72 Tooth Quick Release Ratchet with Polished Handle
 

Crescent CRW12 1/2" Drive 72 Tooth Quick Release Ratchet with Polished Handle

72 Tooth for 5 Degrees of access. Full polished for comfort. Chrome Vanadium Alloy Steel for long lasting durability.


 
Image of Weller SP80NUS Heavy Duty LED Soldering Iron, Red/Black
 

Weller SP80NUS Heavy Duty LED Soldering Iron, Red/Black

High-Performance LED Soldering Iron - 80 Watts, up to 900-DegreeF. Three 5mm high temperature long-life LEDs at 25 Lumens/ft² for superior soldering accuracy and application illumination. Co-molded soft grip ribbed handle design for maximum comfort and...


Tweets by @geartacker

Gear Tacker Price Comparison Engine

Privacy Policy